At Endoca, our production is certified under Good Manufacturing Practices (GMP), which means that our production meets the highest quality standards. We have a very strict quality control system in which we use the latest technology equipment making sure that each product is free from contamination and contains the declared value of cannabinoids, which is confirmed by current analyses.

The production process begins with individual selection of the highest quality raw material. The goal is to produce the highest quality CBD oil. We use the best hemp plants from clean and natural cultivation in Scandinavia, which are free from harmful pesticides and herbicides. This enables Endoca™ to produce the highest quality CBD products.

Our raw materials are quality tested to ensure the highest standards are met. CBD oil testing is done in our laboratory equipped with the latest technology. We use a range of analytical techniques to thoroughly test each batch of our best CBD oil. Ongoing Endoca™ research with leading biochemists and neuroscientists from around the world will help us further identify repeatable quality ingredients and refine our products for further supplementation of your health. For independent evaluation of Endoca™ products, we also use third-party analysis companies

Quality tools and old school passion

Endoca uses only the best and latest technology to create safe and valuable CBD hemp products. Quality control is the center of our quest to provide the customer with the best CBD products that nature and science can offer. We follow strict GMP standards throughout our manufacturing process. Our plants are grown naturally and are not genetically modified. Dried hemp is meticulously, carefully and precisely selected and the crop is harvested gently and dried under the most optimal conditions. Hemp harvesting at Endoca is done by the most dedicated workers using the world's most advanced tools, surpassing those commonly available in public commercial laboratories.

Every batch produced at Endoca is thoroughly tested to ensure that our organic products are free of pesticides, herbicides, mold, heavy metals and other contaminants. Endoca uses the most advanced scientific techniques such as the HPLC method, industry standard as well as advanced nuclear magnetic resonance (NMR) the latest technology to monitor oil composition. We go through these steps to make sure that we are providing our customers with safe CBD hemp products available in the market.

All CBD products Endoca are quality tested

Currently in the hemp market, there is a general lack of quality control and no standards or objective third parties regulating the industry despite what many people think. The various labs that are widely available have many limitations and difficulties in conducting reliable testing and this is for several reasons.


We take the quality of our products seriously because our own reputation is at stake. The quality of our product has to be the best. To achieve this, we invest time and enormous resources in quality assurance and quality control. Continuous improvement is our constant goal to ensure precision, accuracy and repeatability in our approach to agricultural policy and testing

Our mission at Endoca is to lead by example in the hemp industry. Our goal is to become the gold standard for hemp analytical testing and quality assurance. We do this knowing that we are raising the bar of quality and sharing the benefits with all current and future users of hemp products. It is our sincere hope that all laboratories will raise their standards to raise expectations and achieve better quality for the industry as a whole. Endoca wants to share its experience and knowledge through partnerships to ensure that the industry delivers on its promises of quality and consumer safety.

Unfortunately, there are many products on the market that contain toxins such as pesticides, herbicides, molds, fungi and even dangerous but overlooked mycotoxins. Endoca takes no shortcuts and uses as many tests as are available. We test products for over 200 pesticides, heavy metals and mycotoxins. We know that our methods and equipment are world class. This is verified by the independent and Good Manufacturing Practice certified third party laboratories we use.

How do I check the certificate of our product? On each package, you will find a lot number next to the barcode that is assigned to the laboratory analysis.

cBD oil Endoca have the following numbers:

Cannabinoid analysis

The analysis was performed using a Shimadzu HPLC system equipped with a SIL 30AC thermostated injector, DGU 20A5 vacuum and LC-30AD pump. Chromatographic separation was achieved using a Supelco Discovery HS C18 (25 x 4.6 mm, 5 µm) RP column along with the use of a C18 pre column at 30 °C controlled by a CTO-20AC heating oven. Isocratic elution (acetonitrile: water (0.5% FA) (4: 1)) for 30 min was used. The flow rate was 0.8 ml/min. CBD and CBDA cannabinoids were monitored at wavelengths of 225 and 306 nm using an SPD-M20A diode array detector. The concentration of standards was 1 mg/ml at an injection volume of 20 µl. Data evaluation was conducted using Solutions Lab software. Quantitative analysis of the tested cannabinoids was evaluated using a calibration curve for each compound. The calibration range was linear for concentrations from 5 to 500 ng /ml, for CBD and from 5 to 500 ng/ml for CBDA. The retention times of the compounds were as follows: CBDA (RT 9.5 min), CBD (RT 11.1 min). The hemp extract was dissolved in 1 ml of methanol. The solution was then ultrasonicated for 5 minutes and stirred for 10 seconds. Samples were centrifuged at 4800 rpm before HPLC analysis and then diluted with methanol to a final concentration of 1 mg/mL.

Terpene analysis

10 mg of homogeneous sample was weighed and dissolved in 1 ml of pentane containing 0.04% decane as internal standard. The sample was placed in an ultrasonic water bath for 5 min and vortexed. 200 µL of the solution so prepared was diluted with 800 µL of pentane and analyzed by GC-FID. Gas chromatography (Agilent HP 6890) with flame ionization detection (FID) was used for the analysis of terpenes.Chromatographic separation was carried out using RRTX-5 capillary column w / Integra-Guard. Injection onto the chromatographic column was obtained using a split/splitless dispenser in split mode (1:10). The analysis was carried out under the following conditions: temperature program: from 50 °C to 280 °C (ramp-up 15 °C/min), column was held at 280 °C for 15 min, total analysis time 31 min; dispenser temperature 280 °C; transfer line temperature 260 °C; helium flow through the chromatography column 1mL/min. 2 µL of sample was injected onto the column. Data were analyzed using Chemstation v.D.02.00.275 (Agilent Technologies).

CBD quality control Cibdol

Oil 4% CBD Cibdol

Batch no A26

Batch no A25

Batch no A24

Batch no A23

Batch no A22

Batch no A18

Batch no A17

Oil 10% CBD Cibdol

Batch no C09

Batch no C08

Batch no: C07

Batch no C05

Batch no C04

Sorry for the inconvenience.

Search again what you are looking for

Newsletter

Do not miss the opportunity and get additional discounts!